10 Best Ptfe Tube For 1.75Mm Filament Reviews

Disclaimer: We are using Amazon affiliate Product Advertising API to fetch products from amazon, include: price, content, image, logo, brand, feature of products which are trademarks of Amazon.com. So, when you buy through links on our site, we may earn an affiliate commission. Read more

Top 10 Best Products 

Feature of Products

 

Authentic Capricorn PTFE Bowden Tubing (1 Meter) XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter and Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and 2 Blue Collet Clips

$13.99  in stock
Amazon.com
as of January 22, 2022 3:32 pm

Features

  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend.
  • Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. Standard PTFE tubing may experience dangerous “off-gassing” if the hotend is heated to temperatures beyond 240*C and will get worse with higher heats. This Capricorn XS series is safe in 3D printer usage up to 300*C thanks to its proprietary manufacturing methods.
  • Upgraded Pneumatic Fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer manufacturers with plastic teeth or cheap locking mechanisms. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10. 2 collet clips are also provided which drastically increases any hotends precision by eliminating any potential slippage of the Bowden tubing whilst extruding or retracting.
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
  • 1 Meter in length PTFE tubing. F1RST LAYER is an authorized distributor of Creality and Capricorn 3D Printing products. Please contact us directly for any questions or concerns you have about this product or for 24/7 customer support.

Capricorn 1M PTFE Bowden Tubing for 1.75mm Filament with PTFE Teflon Tube Cutter + Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and Collet Clip

$12.99  in stock
Amazon.com
as of January 22, 2022 3:32 pm

Features

  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
  • Capricorn bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend.
  • Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
  • Upgraded Pneumatic Fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer manufacturers with plastic teeth or cheap locking mechanisms. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10.

SIQUK 5 Pieces Teflon Tube PTFE Tubing (1M) with 10 Pieces PC4-M6 Fittings and 10 Pieces PC4-M10 Fitting Connector for 3D Printer 1.75mm Filament

$13.99  in stock
Amazon.com
as of January 22, 2022 3:32 pm

Features

  • Teflon Tube - outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3; it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260℃
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer
  • Attention - small 3D printer accessories, please keep away from children

AMX3d PTFE Teflon Bowden Tube for 1.75 Filament (2.0mm ID/4.0mm OD) – White Connector Tubing for 3D Printer - 1.5 Meters

$6.69  in stock
Amazon.com
as of January 22, 2022 3:32 pm

Features

  • IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance print quality.
  • LOW FRICTION:Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results.
  • HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD.
  • FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to prevent crimping.
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems with your Bowden Tube just let us know!

TECBOSS Bowden Tubing, 2 Meter Premium PTFE Teflon Tube for 1.75mm Filament, Compatible with All 1.75mm PLA ABS 3D Printer

$10.99  out of stock
Amazon.com
as of January 22, 2022 3:32 pm

Features

  • Highest Quality PTFE-Our bowden tubes made from the finest pure virgin PTFE, so it always has good flexibility, abrasion resistance, chemical resistance.
  • High Lubricity Additives-The lowest friction Bowden tubing on the market.more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
  • Lower Retraction-Saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
  • Compatibility-Compatible with all 1.75mm PLA ABS 3D printer. 1.9mm ID reduces the "wiggle room," or buckling, allowing you to print flexible filaments even on the longest Bowden systems.
  • High Temperature Resistance-Heat resistant up to 300℃, See our picture for more details.

SIQUK 4 Pieces Teflon Tube PTFE Tubing(1 Meter) with 8 Pieces PC4-M6 Fittings and 8 Pieces PC4-M10 Male Straight Pneumatic PTFE Tube Push Fitting Connector for 3D Printer 1.75mm Filament

$10.58  in stock
Amazon.com
as of January 22, 2022 3:32 pm

Features

  • Teflon Tube - outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3; it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260℃
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm
  • 2 Colors options - white and blue teflon tube are avaliable,They are compatible with all 1.75mm PLA ABS 3D printer
  • Attention - small 3D printer accessories, please keep away from children

Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting

$13.99  in stock
Amazon.com
as of January 22, 2022 3:32 pm

Features

  • Authentic Guaranteed: The Capricorn Premium XS Bowden Tubing is enhanced with a proprietary blend of high performance additives, it is well regarded as the highest quality PTFE tubing in all of 3D printing.
  • Best Performance: Capricorn bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend.
  • Advanced Material: Capricorn PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃.
  • Perfect Package: Package comes with two PC4-M6 fitting for extruder and two PC4-M10 fitting for hotend, one PTFE tube cutter, which can cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
  • Specifications: 1M Capricorn Bowden PTFE Tubing (1.95mm ± 0.05mm inner diameter, 2mm outer diameter). Reduces the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.

Sovol Capricorn Bowden PTFE Tubing 1 Meter Tube Cutter XS Series 1.75MM Filament for Creality Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S 3D Printer

$11.99  in stock
Amazon.com
as of January 22, 2022 3:32 pm

Features

  • 100% Original Capricorn XS Serious tubing Original.
  • High Lubricity Additives make XS Series tubing the lowest friction bowden tubing on the market. More responsiveness, accurate prints, less retraction , slippage, wear, and tear on the extruder,which make the Capricorn tubing advanced in all series.
  • Lower retraction will save you more time while the extruder retracts in printing.
  • 1.9mm ± 0.05mm Inner Diameter Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.
  • Advanced material of Capricorn XS Series can make it resist higher temperature, Capricorn XS tubing will operate at even higher temperatures than our TL.

Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament (Genuine Capricorn Premium Tubing)

 in stock
Amazon.com
as of January 22, 2022 3:32 pm

Features

  • Brand: Capricorn
  • Length: 1 Meter
  • ID: 1.95mm ± 0.05mm
  • OD: 4.0mm

PTFE Teflon tubing 5ft- 2mm ID X 4mm OD for 1.75 Filament Bowden 3D Printer -Allen Tech PTFE Teflon Tube

$6.99  in stock
Amazon.com
as of January 22, 2022 3:32 pm

Features

  • ID:2mm(0.079'')/OD:4mm(0.158''),Length:5ft.Material: PTFE(common name:Teflon).For 1.75 filament Bowden 3D Printer,Translucent
  • Temperature range (Degree F):-454 to 500. Flame rating: UL-224 VW-1(UL-recognized). Density: 2.15-2.20 g/cm3.
  • Excellent resistant to acids, alkali and all kinds of organic solvents: ASTM D543. High lubricating ability and non-stick
  • Raw materials meet FDA requirements per FDA 21 CFR 177.1550 for use with food contact surfaces
  • Excellent electric property and long life. Widely used in electronics, chemicals, medical and industrial

Video Review

Click Here to Leave a Comment Below 0 comments

Leave a Reply: